Stainless steel, True Bore, Metric Uni Pipe is the most cost effective method of introducing a stainless steel pipework system into your process. In most cases it can be cheaper than Nominal Bore Carbon Steel, due to the thin wall and the use of Carbon Steel Zinc Plated Spinning Flanges. We can offer, made up lengths delivered to your site for your own installation complete with all Nuts, Bolts, Pipe supports & Gaskets. Or we can offer a full manufacture and installation service.Stainless Steel Uni-Pipe is manufactured from high quality Swedish standard stainless steel piping using 6M long lengths and fittings from stock. For further information either ring us on +44 (0)161 761 5214, Or just forward your specific sizes for a prompt quotation. Either Fax us on +44(0)161 764 1914 Or e-mail us at info@prep-tec.co.uk
Flanged Straights Longitudinally welded thin wall 304 & 316 quality stainless steel available with wall thickness of between 1.5 mm to 4 mm depending on the dia. Flanged with mild steel electro zinc plated and passivated spinning type, with drillings and outside diameter to BS4504 Table 10, and Table D. Thickness to BS10 Table 'D'. Flanges can also be offered Full thickness, Galvanized and /or with Green Scotch Coating to comply with Water Authority regulations.
Flanged Straights Template LengthAs per flanged length but with one end supplied with loose flange, please add extra length, say 100mm to allow for site modifications.
Leg Bends Manufactured as walking stick lengths with any angle bend in 304 & 316 quality stainless steel . Bend centre line radius = bore + 100 mm.+ collar height for dimensions see collar table
Leg Bends Template LengthAs per leg bends but with one flange left loose, please add extra length for site modifications.
Pipe Collar Up to and including 500mm bore end rings are available pressed from sheet. 125mm bore and over end rings are available as angle type, both types manufactured in 304 & 316 quality stainless steel. For sizes please click on. collar table .
Joint Packs (Spinning Flanged Joints) Manufactured from 3mm thick full face commercial quality rubber. Also special materials available on request.Nuts, Bolts and Washers Supplied to metric sizes and electro zinc plated and passivated. Hot spun galvanized are also available on request
Pipe Clips Manufactured from 304 quality stainless steel and zinc plated mild steel. Click on highlight to see sizes & more information. Pipeclip table

Flanged Elbows 90°, 60°, 45° & 30° Pressed and welded from 304 & 316 quality stainless steel sheet. Bend centre line radius R = bore + 100mm + collar height click collar table for dimensions.
Flanged Tees All Tees are manufactured from quality 304 &316 stainless steel. For more information on Flanged tee click here on Flanged tees Table
Flanged Tapering Tees Manufactured from quality 304 & 316 Stainless Steel. For information click here on Tees table
Flanged Junction Pieces Manufactured from quality 304 & 316 Stainless Steel. For information click here for the Tees table
Flanged Pressed Tees Manufactured from quality 304 & 316 Stainless Steel. For information click here for the Tees table
Flanged Reducers (Concentric & Eccentric) Longitudinally welded from 304 & 316 quality stainless steel . In wall thickness from 1.5mm to 4mm depending on dia. Any configuration available from 25mm to 700mm. Length = Difference in Dia. x 3 + collar height.

Click here to return to main pipe page

Click here to return to index page